Mining Motherboard
The mining motherboards that are designed and listed are in the form factor of micro ATX and mini-tix motherboards. The downloaded files can be ordered at JLCPCB.
The design of this mining motherboard have two masters for two mining option. Both masters should NOT be use at the same time. This design is a combination of schematics done by JK-Rolling / DuinoCoinI2C This mining board design is done in micro ATX form factor. The slaves are Arduino Nano and the master can be either the Raspberry Pi Zero w or the D1-Mini ESP 8266
The design of this mining motherboard uses the NodeMcu where each is a master. This design was done on a Micro ATX motherboard and is powered by a USB power adaptor.
07-27-2020 Files have been modified to include CC/CV regulator
The design of this mining motherboard have one master. This design is a schematic done by JK-Rolling / DuinoCoinI2C This mining board design is done in mini-itx form factor. The slaves Arduino Nano and the master is the Raspberry Pi Zero w.
The design of this mining motherboard uses the NodeMcu where each is a master. This design was done on a Mini-ITX motherboard and is powered by a USB power adaptor.
